Mostrar el registro sencillo del ítem

dc.contributor.authorPagan, Ana
dc.contributor.authorLlena, Carmen
dc.contributor.authorForner, Leopoldo
dc.contributor.authorSanz, José L.
dc.contributor.authorSánchez Bautista, Sonia
dc.contributor.authorCeballos, Laura
dc.contributor.authorFuentes, Victoria
dc.contributor.authorMelo, María
dc.contributor.authorRodríguez Lozano, Francisco J
dc.contributor.authorOñate Sánchez, Ricardo E.
dc.contributor.authorLopez García, Sergio
dc.contributor.authorAznar Cervantes, Salvador D.
dc.contributor.authorGarcía Bernal, David
dc.date.accessioned2024-07-17T08:28:37Z
dc.date.available2024-07-17T08:28:37Z
dc.date.issued2024-03-01
dc.identifier.issn0109-5641
dc.identifier.urihttp://hdl.handle.net/10952/8006
dc.description.abstractObjectives: The current in vitro study aims to evaluate silk fibroin with and without the addition of graphene as a potential scaffold material for regenerative endodontics. Material and methods: Silk fibroin (SF), Silk fibroin/graphene oxide (SF/GO) and silk fibroin coated with reduced graphene oxide (SF/rGO) scaffolds were prepared (n = 30). The microarchitectures and mechanical properties of scaffolds were evaluated using field emission scanning electron microscopy (FESEM), pore size and water uptake, attenuated total reflectance fourier transformed infrared spectroscopy (ATR-FTIR), Raman spectroscopy and mechanical compression tests. Next, the study analyzed the influence of these scaffolds on human dental pulp stem cell (hDPSC) viability, apoptosis or necrosis, cell adhesion, odontogenic differentiation marker expression and mineralized matrix deposition. The data were analyzed with ANOVA complemented with the Tukey post-hoc test (p < 0.005). Results: SEM analysis revealed abundant pores with a size greater than 50 nm on the surface of tested scaffolds, primarily between 50 nm and 600 µm. The average value of water uptake obtained in pure fibroin scaffolds was statistically higher than that of those containing GO or rGO (p < 0.05). ATR-FTIR evidenced that the secondary structures did not present differences between pure fibroin and fibroin coated with graphene oxide, with a similar infrared spectrum in all tested scaffolds. Raman spectroscopy showed a greater number of defects in the links in SF/rGO scaffolds due to the reduction of graphene. In addition, adequate mechanical properties were exhibited by the tested scaffolds. Regarding biological properties, hDPSCs attached to scaffolds were capable of proliferating at a rate similar to the control, without affecting their viability over time. A significant upregulation of ALP, ON and DSPP markers was observed with SF/rGO and SF/GO groups. Finally, SF/GO and SF/rGO promoted a significantly higher mineralization than the control at 21 days. Significance: Data obtained suggested that SF/GO and SF/rGO scaffolds promote hDPSC differentiation at a genetic level, increasing the expression of key osteo/odontogenic markers, and supports the mineralization of the extracellular matrix. However, results from this study are to be interpreted with caution, requiring further in vivo studies to confirm the potential of these scaffolds.es
dc.language.isoenes
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectGraphenees
dc.subjectRegenerative Endodonticses
dc.subjectScaffoldses
dc.subjectHuman dental pulp stem cell (hDPSC)es
dc.subjectSilk fibroines
dc.title3D Graphene/silk fibroin scaffolds enhance dental pulp stem cell osteo/ odontogenic differentiatioes
dc.typearticlees
dc.rights.accessRightsopenAccesses
dc.relation.projectID10.1016/j.dental.2023.12.009es
dc.journal.titleDental Materialses
dc.volume.number40es
dc.issue.number3es
dc.description.disciplineOdontologíaes
dc.identifier.doi10.1016/j.dental.2023.12.009es


Ficheros en el ítem

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivatives 4.0 Internacional